Textures

PLEASE NOTE: The color representations on your monitor and on any print out generated should not be used for final selection. Actual color and texture selection should be made from a sample produced by Lane Plastering & Stucco using the same tools, techniques and materials proposed for the actual project.  

All standard colors (except for Storm Grey and Charcoal), have a light reflectance value (LRV) greater than 20%. The use of dark colors (LRV less than 20%) is not recommended with EIFS that incorporate expanded polystyrene (EPS). EPS has a sustained service temperature limitation of approximately 160ºF (71ºC). The use of dark colors in some climatic conditions could result in EPS temperatures that exceed this limit. Design professionals can consult Senergy Wall Systems Technical Services to review the feasibility of colors selected for specific projects.​

 PLEASE NOTE: The color representations on your monitor and on any print out generated should not be used for final selection. Actual color and texture selection should be made from a sample produced by Lane Plastering & Stucco using the same tools, techniques and materials proposed for the actual project.  

*We can color match *MOST* standard Sherwin-Williams ColorSnap colors. Please note that some colors may have a light reflectance value (LRV) less than 20%. The use of dark colors (LRV less than 20%) is not recommended with EIFS that incorporate expanded polystyrene (EPS). EPS has a sustained service temperature limitation of approximately 160ºF (71ºC). The use of dark colors in some climatic conditions could result in EPS temperatures that exceed this limit.

 PLEASE NOTE: The color representations on your monitor and on any print out generated should not be used for final selection. Actual color and texture selection should be made from a sample produced by Lane Plastering & Stucco using the same tools, techniques and materials proposed for the actual project.